data sheet scd0696-5 the information in this datasheet does not form part of any contract, quotation guarantee,warranty or representation, it has been produced in good faith and is believed to be accurate and may be changed without notice at anytime. liability will not be accepted by transys electronics ltd for any consequences whatsoever in its use. this publication does not convey nor imply any license under patent or other intellectual/industrial property rights. the products within this specification are not designed for use in any life support apparatus whatsoever where malfunction can be reasonably expected to cause personal injury or death. customers using these products in the aforementioned applications do so at their own risk and agree to fully indemnify transys electronics ltd for any damage/ legal fees either direct, incidental or consequential from this improper use or sale. mechanical dimensions type number breakdown voltage maximum clamping forward voltage leakage volt volt na reverse v br v f reverse i r maximum voltage v cl volt current forward maximum i f (avg) amp power cycle requirement. 1. 10,000 cycles 2. i f = 200% rated current 3. temperature rise 150 4. excursion rate 37.5 /minute, +/- 5 /minute rectifier/zener automotive alternator diode maximum operating temperature range -65 to + 200 maximum storage temperature range -65 to + 200 o c o c o c o c o c a mr2528/mrl2528 - 25 amp mr3528/MRL3528 - 35 amp mr5028/mrl5028 - 50 amp button diode coloured ring denotes cathode b d c f mr2528/3528/5028 nominal 8.5mm mrl2528/3528/5028 nominal 10mm dimensions - mr2528/3528/5028 millimetres inches dim min a b c d f 0.236 0.165 0.326 max 0.251 0.185 0.350 max 6.40 4.70 8.90 min 6.00 4.20 8.30 0.216 0.224 5.50 5.701 5 nominal 5 nominal dimensions - mrl2528/3528/5028 millimetres inches dim min a b c d f 0.236 0.165 0.370 max 0.251 0.185 0.409 max 6.40 4.70 10.40 min 6.00 4.20 9.70 0.216 0.224 5.50 5.701 5 nominal 5 nominal maximum mr5028 mrl5028 200 @ vr =20 volt < 34 @ ir = 2.8 x if avg 80 s < 2% duty cycle 1.05 @ 100a t = 300 s < 2% duty cycle 24 - 32 @ 100ma 50 mr3528 MRL3528 200 @ vr =20 volt < 34 @ ir = 2.8 x if avg 80 < 2% duty cycle 1.05 @ 100a t = 300 s < 2% duty cycle 24 - 32 @ 100ma 35 s mr2528 mrl2528 200 @ vr =20 volt < 34 @ ir = 2.8 x if avg 80 < 2% duty cycle 1.05 @ 75a t = 300 s < 2% duty cycle 24 - 32 @ 100ma 25 s transys electronics ltd birmingham uk. email: sales@transyselectronics.com website: www.transyselectronics.com tel: 44 (0) 121 776 6321 fax 44 (0) 121 776 6997 * visual to mil std 750c * 100 % tested features * low reverse leakage * low forward voltage * epi layer for tight control of parameters * silicon oxide passivation for superior junction protection * load dump capability characterisitics at 25 (unless stated otherwise) o c @ ta = 150o c surge current peak forward non repetitive i fsm amp 400 @ 8.3ms single half wave. (jedec method) 600 @ 8.3ms single half wave. (jedec method) 800 @ 8.3ms single half wave. (jedec method)
|
